Guides

Beaufort scale explained: wind force in knots and sea state

By Published
Two yachts under sail on a smooth sea, seen past the guardrail of a third

The Beaufort scale gives the wind a number from 0 to 12. Force 0 is calm, under 1 knot. Force 12 is hurricane force, 64 knots or more. Marine forecasts use it, the Met Office's among them, so when a forecast says "southwest 5 to 7" it means a mean wind somewhere between 17 and 33 knots.

Every figure below comes from the Met Office's Beaufort table, its marine forecast glossary and its library archive. The sources are listed at the end.

What is the Beaufort scale?

The Met Office describes it as an empirical measure of wind intensity, based on observed sea conditions. Each force covers a band of mean wind speed and comes with the sea you can expect once the waves have had time to build. Gusts are not part of the force number, though gusts alone can trigger a Met Office gale warning.

Beaufort scale in knots, with wave heights

Wave heights are the Met Office's probable height, with the probable maximum in brackets. They describe well-developed waves in the open sea.

  • Force 0, Calm: under 1 knot. Sea calm and glassy.
  • Force 1, Light air: 1–3 knots. Calm, rippled sea, 0.1 m.
  • Force 2, Light breeze: 4–6 knots. Smooth sea with wavelets, 0.2 m (0.3 m).
  • Force 3, Gentle breeze: 7–10 knots. Slight sea, 0.6 m (1.0 m).
  • Force 4, Moderate breeze: 11–16 knots. Slight to moderate, 1.0 m (1.5 m).
  • Force 5, Fresh breeze: 17–21 knots. Moderate, 2.0 m (2.5 m).
  • Force 6, Strong breeze: 22–27 knots. Rough, 3.0 m (4.0 m).
  • Force 7, Near gale: 28–33 knots. Rough to very rough, 4.0 m (5.5 m).
  • Force 8, Gale: 34–40 knots. Very rough to high, 5.5 m (7.5 m).
  • Force 9, Strong gale: 41–47 knots. High, 7.0 m (10.0 m). The Met Office uses the term severe gale.
  • Force 10, Storm: 48–55 knots. Very high, 9.0 m (12.5 m).
  • Force 11, Violent storm: 56–63 knots. Very high, 11.5 m (16.0 m).
  • Force 12, Hurricane: 64 knots or more. Phenomenal, 14 m or more.

How do I convert Beaufort to mph or m/s?

The Met Office gives two factors: multiply knots by 1.15 for miles per hour, or by 0.514 for metres per second. Force 6, 22–27 knots, is therefore about 25–31 mph, or 11–14 m/s.

What do gale, severe gale and storm mean in a forecast?

In Met Office marine forecasts these words have fixed meanings, and for all but hurricane force, gusts alone can be enough to earn them:

  • Gale: winds of at least force 8 (34–40 knots), or gusts reaching 43–51 knots
  • Severe gale: force 9 (41–47 knots), or gusts reaching 52–60 knots
  • Storm: force 10 (48–55 knots), or gusts reaching 61–68 knots
  • Violent storm: force 11 (56–63 knots), or gusts of 69 knots or more
  • Hurricane force: force 12 (64 knots or more). The word hurricane on its own means a true tropical cyclone.

The timing words in a gale warning are just as exact:

  • Imminent: expected within 6 hours of the time of issue
  • Soon: expected within 6 to 12 hours
  • Later: expected more than 12 hours from the time of issue

Wind direction is always the direction the wind blows from. Veering means the wind shifts clockwise, for example SW to W. Backing means it shifts anticlockwise, for example SE to NE.

What do slight, moderate and rough sea mean?

Sea state words in the same forecasts are tied to wave height:

  • Smooth: under 0.5 m
  • Slight: 0.5–1.25 m
  • Moderate: 1.25–2.5 m
  • Rough: 2.5–4.0 m
  • Very rough: 4.0–6.0 m
  • High: 6.0–9.0 m
  • Very high: 9.0–14.0 m
  • Phenomenal: over 14.0 m

Why doesn't the sea match the table?

The Met Office adds two notes under its table. The wave heights refer to well-developed wind waves of the open sea, and there is a lag between the wind getting up and the sea increasing. So in the first hours of a new breeze the sea can be smaller than the table suggests, and along the coast the open-sea figures are a guide rather than a promise. Height is also only half the story: our guide to wave period explains why two seas of the same height can feel different.

Where did the Beaufort scale come from?

Francis Beaufort, a naval officer and chart surveyor, created the scale in 1806 while in command of HMS Woolwich, according to the Met Office archive, which holds his weather diaries. He revised it in 1807, and his final version in 1810 added the effect of each force on a Royal Navy frigate. The Royal Navy adopted it, other countries followed, and it is still in use today, especially in marine forecasting.

How to use the Beaufort scale before a coastal trip

  1. Read the force and the gusts. Turn the force into knots with the table above. If your forecast gives gusts, read that figure on its own. A gale warning can come from gusts alone.
  2. Check the timing word. Imminent, soon and later tell you how much of your day is left before the change.
  3. Read the sea state, not only the wind. A force 5 over a moderate sea is a different day from a force 5 over a slight one.
  4. Allow for the lag. If the wind has only just risen, the sea is still building.
  5. Decide your limits ashore. Agree with your crew, before you leave, the force at which you reef, stay in harbour or turn back.

MARLOG's Forecast tab shows wind speed and gusts in knots and wave height in metres for a point you choose, not as a Beaufort number, so the table above is the quickest way to translate. It does not show official warnings. For those, follow your national met office. Download MARLOG on the App Store.

Sources

← All entries